Know How to Repair a Computer in 4 Easy Steps

The process of identifying, troubleshooting and resolving the issues in a non-working faulty computer is termed as Computer repair. It requires the knowledge and application of various tools, procedures, and techniques to resolve issues related to Computer Hardware Repair, Software, Network Connectivity.

A hardware fault generally requires physical review of a computer and check for malfunctions. RAM, hard disk, optical drive, keyboard, mouse are all classified as the hardware device. They need to be individually tested and go through troubleshooting. You will either have to repair it or replace it.

Software-based computer issues are related to Operating system configuration and updates.  Users first need to check there is no viruses and malware activity. Next, you need to consider the status update, driver issues, and other related feature.

Most of the issues occurring in a computer are handled by professional computer technicians. However, there are some issues that can be resolved by the users themselves.

Troubleshoot Computer Issues:

There are numerous issues and error that may affect a computer hardware or software and cause it to malfunction. One of the first things you need to do before repairing a computer is to detect what exactly is causing the problem. Once the problem has been detected you need to identify the intensity of the problem i.e whether it can be solved by you or you need to go for technical help. Once these two things have been covered you need to analyze the process you will be following to resolve the particular issue. Here, I have explained the technique of resolving one of the common problems that affect a computer.

Computer Hardware Repair

 

How To Fix: Computer Keeps Freezing:

Your computer can keep freezing or hanging due to the number of hardware or software issue. So it is very important to determine what causes computer freezing. You need to observe when the computer freezing occurs. If the issue starts when you connect any hardware like printer or scanner to the computer, then it might be due to excessive heat or insufficient power. Follow the below-mentioned solution to fix the issue.

Give your computer some time to cool:

Using a computer for a prolonged period of time cause overheating of computer hardware which can lead to freezing of the Operating system. In order to fix this issue, it is important to give some time to the computer to cool. Just turn off your computer for some time and let it cool. Unplug it from the power board and remove the battery. After the system has cooled reinsert the battery and power it on. By removing the power supply to the motherboard you allow hardware to reset and the memory to clear.

Check if your computer becomes too hot:

To make sure that your computer is not getting heated too quickly you will have to take a look inside. Before opening your computer, shut it down completely and remove its chord from the power supply board.

Diagnostics:

Nowadays HP, Dell, and other brands computers come with inbuilt diagnostics to detect issues. To use these diagnostic features follow the below mention process.

  • Power off your computer and after a few minutes turn it on again.
  • For Hp laptops, repeatedly press F2 key to access the diagnostic menu. Select from the options given to begin the testing process.
  • For Dell laptop, start pressing the F12 key on startup to enter the diagnostic menu and perform testing.

Note down the error code and consult the technicians for assistance.

Use System Restore:

System restore brings back your computer to the state where it was working fine. For this, you need to create a backup of your OS on a regular basis and keep it safe. This can be done both manually and automatically. Once System Restore is completed it cannot be undone if you are running your OS in Safe Mode or Windows Recovery Mode.

Check your Device Drivers

Most of the times users face software issues due to obsolete drivers. Whenever you do Windows Update, the system may download and install the incorrect driver. This may lead to computer freezing. You can check the status of drivers from Windows Device Manager. Remove peripheral devices one by one and find out which device was creating the issue.

Get the Best Technical Help

These were some of the simple techniques by which you can repair small issues occurring in your computer. If you are unsure of a certain process then stop the repair process immediately, else you may end up causing further damage to your computer. It is quite annoying if you are unable to fix a certain error. However Don’t worry, there are many Support center available who will be able to resolve your issue. So contact a reliable customer support service and get instant technical help.

Reply

Skip to toolbar