Many Windows 7, 8.1, and 10 users have reported the problem that their newly purchased internal hard drive is not showing up in Disk Management. However, the HDD is showing in the settings of the BIOS.
This problem takes place due to the many causes that have been discussed in the following section. If you are one of the users who is facing this problem, then not to worry at all. Here, you will get to know the reasons for this new hard drive not showing up problems as well as you will get the solutions to overcome this problematic error.
Reason for the New Hard Drive Not Showing up in Disk Management:
There are various reasons responsible for the occurrence of this problem. Here are some of the common reasons:-
- SATA cable is faulty– When you are seeing that your new hard drive is not showing up in Disk Management but showing in the settings of BIOS, then it is generally the indication that there is a faulty SATA cable.
- The ATA devices are not being found by Windows– Many users have reported that they were able to solve this problem when they deleted the channels of ATA from the controller of ATAPI or the IDEA ATA. By doing so, the operating system will be forced to locate the devices of ATA again.
- The HDD is present within a storage space– Many users were able to solve this problem by deleting the virtual storage of Windows.
- SATA driver got corrupted or not installed– Another reason for hard drive not showing up in Disk Management Windows 10 problem is the corrupted SATA drive. By reinstalling the SATA driver, many users have got positive results.
- Your new hard disk is being detected as a foreign disk– This is the reason for the problem to many users.
Procedures to Solve the Problem of New Hard Drive Not Showing up in Disk Management:
Now, let us see the solutions which will help in solving this problem of hard drive not showing up in Disk Management:-
Solution 1: Enter the BIOS and Replace your Existing SATA Cable with a New One
If you see that your new internal hard drive is only showing in the BIOS and not in the Disk Management, then it indicates that you are having a hardware problem. There is a chance that the connection of the SATA cable between the motherboard and your new hard disk is broken. Due to this reason, the requirement of your OS is not being fulfilled. Hence, the disk is not showing within Disk Management.
However, this same thing will happen if you are having a SATA port that is broken. So, to solve this problem, you have to enter the BIOS. To enter the BIOS settings, you have to repeatedly keep pressing the Setup key. For most of the motherboard, the setup keys will show up at the bottom of the screen during the initial bootup. However, if the Setup keys are not visible, you can press any of the F keys.
When you are inside BIOS, you have to enter the “Boot” tab and find the new hard disk. After confirming that your new hard disk is showing inside BIOS, you have to power off the computer. Then, you have to remove your existing SATA cable and replace it with a new SATA cable. After the setup is completed, you can now switch on your computer.
Now, check if the new internal hard drive is visible inside the Disk management. If Yes, then you have successfully solved the problem of the internal hard drive not showing up in Disk Management.
Solution 2: Using the Device Manager to Delete the Drivers of All the ATA Channel
Many users have been able to solve this problem by deleting all the channels of ATA and by using the Device Manager. When the channels are deleted, then Windows is forced to search for all the ATA devices that are connected. This will re-configure these devices when the system starts up the next time.
You can follow the given steps to perform this solution successfully:-
- Open the Run box by pressing the R and the Windows Key at the same time. Now, in the Run box, you have to write “devmgmt.msc” and then hit Enter. This will open the Device Manager.
- Within the Device Manager, you have to click on IDE ATA/ATAPI. This will expand the drop-down menu.
- Now, locate the “ATA Channel” option and right-click on it. From the menu, you have to select the Uninstall device option.
- After you have uninstalled the first channel of ATA, you have to perform this procedure for all the other ATA Channel.
- When you have uninstalled all the ATA Channels, you have to restart your computer. After this, Windows will locate all the devices of ATA and it will download the necessary drivers when the computer starts up.
- After the computer turns back on, check your Device Management and see if your internal hard disk is showing.
However, if you are still facing the problem of a new hard drive not showing up, then you can proceed to the next solution.
Solution 3: Remove the Virtual Storage by Using the Internal Hard Disk
This problem can also occur if you have built common storage by using the internal hard disk. Some of the users who were affected by this problem have been able to solve this problem by deleting any space for storage which was using the internal hard drive.
You can follow the given below steps to solve the problem of internal hard drive not showing up in Disk Management:-
- Press the R and the Windows key for opening the Run box.
- After that, you have to write “control” and hit the Enter key. This will bring up the window of the Control Panel.
- In the Control Panel, you have to select the “System and Security” option. Now, select the “Storage Spaces” option.
- After that, expand the “Storage Pool” option. Here, you will see the “Delete” option, then click on this option.
- Next, when a prompt will show up to confirm your choice, you have to click on “Yes”. After that, restart the computer.
- When the computer will startup, you can check your Disk Management if the internal hard disk has become visible or not.
However, if the hard drive not showing up in Disk Management Windows 10 problem is still there, then you can move to the following solution.
Solution 4: Install the SATA Driver
Another solution for the new hard drive not showing up in Disk Management is installing the driver of the SATA from the website of the manufacturer of the motherboard. The procedure for this is different for different manufacturers. You can search for the website of the manufacturer and then search the model of your motherboard. From there, you can check whether the driver of SATA is available or not.
Download the driver and then double-click on the file. Then, to install the driver, you have to follow the on-screen commands. When the installation is done, you can restart your computer and check if the hard drive not displaying in Disk Management Windows 10 issue is solved or not.
Solution 5: Import the Foreign Disk
Sometimes, the system views the internal disk as a foreign disk. Follow the give steps to solve the internal hard drive not showing up in the Disk Management problem by importing foreign disk. This is how you can do this:
- Open the Run box by pressing the R and Windows key at the same time. Then, hit the Enter button after writing “diskmgmt.msc”. This will open the Disk Management window.
- Now, within the Disk Management Utility, you have to find another disk within the OS disk. If you find a disk and there is an icon of exclamation beside it, then you have to right-click on this disk and select the “Import Foreign Disk” option.
- You have to wait for a bit and then the internal hard disk will be seen within the Disk Management as well as the File Explorer.
Summing Up
Hope that you were able to understand the solutions and implemented them carefully for resolving the new hard drive not showing up in Disk Management issue. These solutions are very simple and effective and thus you will surely be able to get rid of this problem once you go through this guide.